建设宁夏石嘴山千吨级多晶硅产业基地的有利条件及优势研究

多晶硅是重要的电子与半导体原材料,建设千吨级硅产业基地具有重要的战略意义与经济效益。通过对建设千吨级多晶硅宁夏石嘴山产业基地的基础条件与优势进行探讨,认为在宁夏石嘴山建设千吨级多晶硅产业基地具有得天独厚的优势与条件,是必要和可行的。     

Dependence of Silicon Carbide Product Morphology on the Degree of Mechanical Activation

Mechanical activation before carbothermic reduction can substantially enhance the formation of SiC from SiO₂and carbon mixtures. However, the morphology (e.g., particles or whiskers) of SiC formed from mechanically activated SiO₂and carbon mixtures is dependent of the degree of mechanical activation and the condition of the subsequent carbothermic reduction. These phenomena are investigated and rationalized based on the increased reactivity of the reactants and SiC formation mechanisms.     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

The peeling of flexible probabilistic fasteners

Probabilistic fasteners are attachment devices consisting of two elements each of which is covered by an array of outgrowths or protuberances which interact or interlock with those on the opposing surface to form a bond which can be made and detached many times. A number of peel tests are described in which the behaviour of such bonds, specifically those formed by Velcro® hooks and loops and Dual Lock®, has been explored. The value of the specific energy of detachment of such mechanically latched systems can be related to the geometry and material properties of the individual fixing elements. Similar arguments can be applied, both qualitatively and quantitatively, to some natural systems such as the spines on some cacti.     

VHF-PECVD制备微晶硅材料的均匀性及其结构特性的分析

采用VHF-PECVD技术在多功能系统(cluster tool)中制备了系列硅薄膜，研究薄膜的均匀性及电学特性和结构特性。结果表明：气压和功率的合理匹配对薄膜的均匀性有很大的影响；材料的喇曼测试和电学测试结果表明微晶硅薄膜存在着纵向的结构不均匀，在将材料应用于器件上时，必须要考虑优化合适的工艺条件；硅烷浓度大，相应制备薄膜的晶化程度减弱，即薄膜中非晶成分增多。     

A novel integration approach for combining the components to minimize a micro-fuel cell

This work employs porous silicon as a gas diffusion layer (GDL) in a micro-fuel cell. Pt catalyst is deposited on the surface of, and inside, the porous silicon by the physical vapor deposition (PVD) method, to improve the porous silicon conductivity. Porous silicon with Pt catalyst replaces traditional GDL, and the Pt metal that remains on the rib is used to form a micro-thermal sensor in a single lithographic process.     

柔性轧制Q390C和Q420C钢板生产实践

目前市场对中厚板的订单具有个性化和多样化的特点，而对于不同强度级别的钢板，化学成分设计往往是不同的，这样会增加不同钢坯冶炼之间衔接的时间及化学成分控制的难度，导致冶炼成本增加，工序复杂化。结合市场需求与生产实际，采用同一Q390低合金高强度钢板坯，通过不同的控轧控冷工艺，对Q390C和Q420C两种强度级别热轧钢板进行了试制。结果表明，通过控轧控冷技术，可以充分发挥细晶强化作用，采用同一Q390低合金高强度钢板坯实现了Q390C和Q420C两个强度级别热轧钢板的柔性生产。试制生产的两种钢板，强塑性及0 ℃冲击功均满足标准要求，Q420C钢板屈服强度达441 MPa以上，抗拉强度达579 MPa以上。采用柔性轧制技术，降低了Q420C高强钢板的生产成本。     

硅光子学

硅光子学有六个主要研究领域，包括产生光、在硅中选择地引导和传输光、编码光、探测光、包装器件和智能地控制这一切光子功能。综述了以上各领域的研究进展。     

TFT有源矩阵α－Si∶H薄膜PECVD淀积工艺研究

分析了α－Ｓｉ∶Ｈ薄膜的质量和厚度对α－Ｓｉ∶ＨＴＦＴ关键性指标的影响，深入、详细地讨论了其ＰＥＣＶＤ淀积工艺，并在实验的基础上确定了最佳淀积工艺参数，从而获得了高性能的７５ｍｍ３７２×２７６像素α－Ｓｉ∶ＨＴＦＴ有源矩阵     

柔性单桩变形机理分析及沉降和承载力计算

在讨论桩的受力和变形机理的基础上 ,利用土力学理论和位移协调条件推导出了柔性单桩承载力和沉降计算公式。并通过一个工程实例 ,对所提出的计算公式进行了验证